USAfixTM - Repair Guide (RG) - Master

Email RG

- Check the main switch

Level of Difficulty - HIGH	Estimated Completion Time - 5 minutes
TASKI - SWINGO 150
	Tools Required Tool   Screwdriver-phillips Volt meter (True RMS capable)
	Parts Required

Step   Procedure & Parts & Tools 1 PULL DOWN ON THE HANDLE RELEASE LEVER AND LIFT UP ON HANDLE TO REMOVE IT. 2 REMOVE THE 6 SCREWS IN BACK OF HANDLE. Screwdriver-phillips 3 LIFT UP ON THE BACK OF HANDLE TO SEPARATE FROM THE FRONT OF HANDLE. 4 LOCATE THE MAIN SWITCH (THIS IS THE ORANGE SWITCH). PULL THE 4 WIRES FROM THE SWITCH. THE 4 POSTS SHOULD NOW BE VISIBLE. 5 TOUCH THE VOLT METER LEADS TO THE TOP AND BOTTOM LEFT POSTS (DOES NOT MATTER WHICH LEAD GOES WHERE). SET THE VOLT METER TO CONTINUITY. THE VOLT METER SHOULD BEEP. REPEAT THIS PROCESS FOR THE TOP AND BOTTOM RIGHT SIDE POSTS. REVERSE STEPS 1 THRU 4 TO REASSEMBLE MACHINE. Volt meter (True RMS capable)